Home > NEWS > Industry News >

How to produce 80-600 mesh feldspar powder?

Source: clirik   By Administrator   Posted: 2021-05-31   

Feldspar is the general term for minerals of the feldspar group by geologists. It is a mineral containing calcium, sodium and potassium. It is a common mineral in the earth's crust and is also the main mineral component of igneous rocks. The feldspar rich in potassium or sodium is mainly used in the ceramic industry, glass industry and enamel industry.

 

feldspar use
 

The feldspar with beautiful color can be used as decorative stone and inferior gemstone.

 

feldspar
 

The feldspar powder is the powder of this mineral, which is widely used in ceramics, glass, enamel industries and other industries. The use of feldspar powder is in industry. The main industries used include glass manufacturing, ceramics, enamel and other industries such as abrasives and welding electrodes. Among them, the use of feldspar powder in the ceramic industry has reached 30%.

 

Potash feldspar powder production equipment:

Potash feldspar (orthosite) is a kind of aluminosilicate mineral, the color is mostly flesh red, yellow white, white, gray, etc. It can be used as potash fertilizer, ceramics, glass, fireproof calcium silicate board, etc.

 


 

Before realizing the industrial value of potash feldspar, it must be ground first. Potash feldspar powder with 80-600 mesh can meet most industrial needs. The equipment used in the 80-600 mesh potassium feldspar grinding production line usually includes a jaw crusher, a Raymond mill (main unit), an electromagnetic vibrating feeder, a bucket elevator, a powder separator, a fan, and a pipeline Devices, etc., which are mainly composed of jaw crusher and Raymond mill.

 

Jaw Crusher

Jaw crusher is a special equipment for preliminary crushing of potash feldspar, with jaw plate, frame, transmission parts, etc. as the core components, with high output, low cost, long life, uniform crushing granularity, complete specifications, and more energy-saving , Non-polluting, easy to operate, low investment, etc. It can crush the material to the grinding specification, which has an irreplaceable effect and value.

 

Raymond Mill

Raymond Mill is the "main force" of the entire production line. It can grind the crushed potassium feldspar to a reasonable fineness. It is a key equipment with outstanding advantages and characteristics. The YGM Raymond Mill independently developed by CLIRIK, It is an upgrade of the traditional Raymond mill, with high output, low energy consumption and higher powder selection accuracy:

 

1. With sufficient grinding force, reduce the grinding roller, increase the grinding space, reduce the wear between the roller and the ring, and reduce the vibration and noise. At the same time, the airflow resistance of the fan is reduced, and the output is 20%~30% higher than R Raymond grinding;

 

2. High efficiency and good stability. The ring and the roller are always in contact during the machining process, which improves the efficiency and stability of grinding;

 

3. Small footprint, low investment, environmental protection, high level of system automation, small size, simple operation, effectively improving the labor environment of workers, and realizing low-carbon production;

 

4. The powder classification accuracy is higher, and the particle size does not leak. The frequency conversion squirrel cage classifier (patented product) is used, and the accuracy is 80-600 mesh. The classification efficiency reaches 99%. The powder selection is stable and adjustable. Compared with the blade type, it can greatly improve the efficiency of powder selection and the qualified rate of finished products;


 raymond mill
 

Process of 80-600 mesh potassium feldspar grinding powder production line:

First, the large potash feldspar is coarsely crushed by the jaw crusher, and is lifted into the silo by the bucket elevator, and then fed into the Raymond mill evenly and quantitatively by the electromagnetic vibrating feeder for grinding processing ;At this time, the customer can adjust the reasonable fineness according to the needs, and then it will be screened in the powder separator under the action of the blower. The unqualified materials will be returned to the host for re-grinding, and the materials that meet the conditions will enter the finished product through the pipeline device. Storage bin, and finally collect and package uniformly.



 

The feldspar is widely distributed, the feldspar powder is good and cheap, and it is widely used, and the demand for output has greatly increased. If you need to produce feldspar powder, you can contact us, we have a professional technical service team, and provide factory prices. Of course, in addition to grinding feldspar, our equipment can also grind various ores. In addition to the above equipment, our company also has self-developed ultra-fine mills, vertical mills, etc., looking forward to your message!

tel&WhatsApp:+8613917147829